The bar –frame work misfit: Review article

Ahmed M Kushlaf; Mohamed A  El Maroush; Mohammed S  Al Rajehi; Mohammed  A  Benragab; Suleiman M Esayah

doi:10.54361/

Authors

Ahmed M Kushlaf Periodontology Department, Faculty of Dentistry, Alzawya University, Libya Author
Mohamed A El Maroush Removable prosthodontics Department, Faculty of Dentistry, Tripoli University, Libya Author
Mohammed S Al Rajehi Removable prosthodontics Department, Special Clinic, Kuwait Author
Mohammed A Benragab Removable prosthodontics Department, Faculty of Dentistry, Tripoli University, Libya Author
Suleiman M Esayah Removable of Prosthodontics Department, Faculty of Dentistry, Khalije Libya University, Libya Author

DOI:

https://doi.org/10.54361/

Keywords:

implantoverdenture, bar attachment, misfit

Abstract

Implant overdenture withAttachment were used to improve the stability and function of the prostheses and increases patient satisfaction.A passive fit between the metal framework and the bar attachment is required for successful restoration. Framework-bar misfit is a common problem observed in overdentures, which might result in prosthetic and biological complications.In the present article was reviewed the literature concerning on the causes, complication and overcome of misfit.

References

Kuoppala R, Näpänkangas R, Rustia A.Outcome of implant-supported overdenture treatment-a survey of 58 patients. Gerodontology. 2012; 29:577-84.

Bilhan H, Mumcu E, Dayan C, Yabul A, Tuncer N. Comparison ofpatient satisfaction, quality of life, and bite force between elderly edentulous patients wearing mandibular two implant-supported overdentures and conventional complete dentures after 4 years. Spec Care Dent. 2012; 32:136-41.

Abouseta F, Elsyad M, Samir A.Effect of Different implant angulations on peri- implant strain under locator retained mandibular overdenture. An In-vitro Study.J Mansoura Dent .2015;2:79-83

Trakas T, Michalakis K, Kang K, Hirayama H. Attachment systems for implant retained overdentures: a literature review. Implant Dent. 2006; 15:24–34.

Allen EP, Bayne SC, Brodine AH, Cronin RJ , Donovan TE, Kois JC et al Annual review of selected dental literature: report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry. J Prosthet Dent. 2003; 90:50–80 .

Al-Turki L, Chai J, Lautenschlager E, Hutten M. Changes in prosthetic screw stability because of misfit of implant-supported prostheses. J IntProsthodont. 2002 15:38–42.

Kan J, Rungcharassaeng K, Bohsali K, Goodacre C, Lang B. Clinical methods for evaluating implant framework fit. JProsthodont .1999; 81: 7-13.

Laverty D, Green D, Marrison D, Addy L, Thomas M. Implant retention systems for implant-retaindedoverdentures. J Bri Dent. 2017;2:347-359

Karl M, Rosch S, Graef F, Taylor T, Heckmann S. Strain situation after fixation of three-unit ceramic veneered implant superstructures. Implant Dent. 2005;14:157–65

Sahin S, Çehreli M. The significance of passive framework fit in implant prosthodontics: current status. Implant Dent. 2001; 10: 85-92.

Brånemark PI. Osseointegration and its experimental background. J Prosthet Dent 1983;50:399-410.

Klineberg IJ, Murray GM. Design of superstructures for osseointegrated fixtures. J Swed Dent 1985;28:63-9

Jemt T. Failures and complications in 391 consecutively inserted fixed prostheses supported by Brånemark implant in the edentulous jaw: a study of treatment from the time of prostheses placement to the first annual check up. J Int OralMaxillofac Implants. 1991;6:270-6.

Alqahtani AS. Comparing the Vertical Misfit of Casts Produced By Two Verification Jigs. Marquette University. 2014: 6,7.

Kan J, Rungcharassaeng K, Bohsali K, Goodacre C, Lang B. Clinical methods for evaluating implant framework fit. J prosthodent. 1999; 81: 7-13.

Jemt T, Lie A. Accuracy of implant‐supported prostheses in the edentulous jaw. Analysis of precision of fit between cast gold‐alloy frameworks and master casts by means of a three‐dimensional photogrammetric technique. Clin Oral Implants Res 1995; 6: 172-180.

Mulcahy C, Sherrif M, Walter JD, Fenion MR. Measurement of misfit at the implant-prosthesis interface: an experiment method using a coordinate measuring machine. J Intorallmaxillofac implant.2000;15:111-8.

Brosh T, Pilo R, Sudai D. The influence of abutment angulation on strains and stresses along the implant/bone interface: comparison between two experimental techniques. JProsthodont. 1998; 79: 328-34

Abduo J, Bennani V, Waddell N, Lyons K, Swain M. Assessing the fit of implant fixed prostheses: a critical review. J Int oral lmaxillofac implant. 2010; 25:506-515.

Del’Acqua MA, Arioli-Filho JN, Compagnoni MA, MolloFde A Jr. Accuracy of impression and pouring techniques for an implantsupported prosthesis. J Int orallmaxillofac implant .2008;23:226–36.

Abreu RT, Spazzin AO, Noritomi PY, Consani RL, Mesquita MF. Influence of material of overdenture-retaining bar with vertical misfit on three-dimensional stress distribution. J Prosthodont. 2010;19:425–431.

Power JM, Sakaguchi RL, Cragi s. Restorative Dental Material. 12th ed. St Louis: Mosby. 2006

Kim S, Nicholls J, Han C, Lee K. Displacement of implant components from impressions to definitive casts. J Int OralMaxillofac Implants, 2006; 21: 747-55.

Vigolo P, Majzoub Z, Cordioli G. Evaluation of the accuracy of three techniques used for multiple implant abutment impressions. JProsthodont. 2003; 89: 186-2.

Assuncao W, GennariFilho H, Zaniquelli O. Evaluation of transfer impressions for osseointegrated implants at various angulations. Implant dentistry 2004; 13: 358-66

Del'Acqua MA, Chávez AM, Amaral ÂL, Compagnoni MA. Comparison of impression techniques and materials for an implant-supported prosthesis. J Int Oral Maxillofac Implants. 2010; 25:211-6

Lee SJ, Gallucci GO. Digital vs. conventional implant impressions: efficiency outcomes. Clin oral implants Res. 2013; 24: 111-5.

Schaefer O, Decker M, Wittstock F, Kuepper H, Guentsch A. Impact of digital impression techniques on the adaption of ceramic partial crowns in vitro. J Dentist 2014; 42: 677-683

Gimenez B, Ozcan M, Martinez-Rus F, Pradies G, Accuracy of a Digital impression system based on active wave front sampling technology for implants considering operator experience, implant angulation and depth. Clin implant Dentist related res.2015;17:55-58.

Birnbaum NS, Aaronson HB. Dental impression 3D Digital scanners: virtual becomes reality. compendium of continuing education in dentistry.2008;29:494-505

Kadam P.Digital and conventional impression die accuracy: the university of Alabama at brimingham;2009

Lee YJ, Heo SJ,Koak JY, Kim SK: Accuracy of Different impression techniques for internal-connection implants. Int J OralMaxillofac Implants. 2009;24: 155-8.

Pereira J, Morsch C, Henriques B, Nascimento R, Benfatti C, Silva F, et al. Removal torque and biofilm accumulation at two dental implant-abutment joints after fatigue. Int J OralMaxillofac Implants 2016;31:813-9

Carr AB, Stewart RB.Full arch implant framework casting accuracy: preliminary in vitro observation for in vivo testing. J Prosthodont.1993;2:2-8

Spazzin AO, Spazzin WO, Schuh C, Bacchi A, TostaVB,Marcaccini AM. Technique of framework cemented on preparedabutments to obtain passive fit at fixed complete denture:a 2-year follow-up report. J Braz 2014;25:565-70.

Chun HJ, Cheong SY, Han JH, SJ, chung JP, Rhyu IC, et,al. Evaluation of design parametres of osseointegrated dental implants using finite element analysis. J oral Rehab.2002;29:565-74

Macedo JP, Pereira J, Vahey BR, Henriques B, Benfatti CA, Magini RS, et al. Morse taper dental implants and platform switching: The new paradigm in oral implantology. J EurDent 2016;10: 148-54.

Monteiro DR, Goiato MC, GennariFilho H, Pesqueira AA. Passivity in implant-supported prosthesis. J craniofaci surg.2010;21:413-23

Brunski JB Biomechanical factors affecting the bonedental implant interface. Clin Mater. 1992; 10: 153-201.

Norowski PA, Bumgardner JD. Biomaterial and antibiotic strategies for peri‐implantitis: A review. J Bio Mater Res Part B: Applied Biomaterials. 20091;88:530-43

Jendresen M, Allen E, Klooster J, McNeill C, Phillips R, Preston J. Report of the committee on scientific investigation of the american academy of restorative dentistry. J Prosthodont1991; 66: 84-131.

Haselhuhn K, MarottiJ, tortamano P, wesis C, suleiman I wolfart S. assesstment of the stress transmitted to dental implants connected to screw-retained bars using different casting techniques. J oralimplantogy.2014; 40:641-8.

Abduo J, Lyons K, Bennani V, Waddell N, Swain M. Fit of screw-retained fixed implant frameworks fabricated by different methods: a systematic review. J Int Prosthodont. 2011; 24:120-5

Alqahtani AS. Comparing the vertical misfit of casts produced by two verification jigs. Marquette University. 2014.

Ortorp A, Jemt T, Back T, Jalevik T. Comparisons of precision of fit between cast and CNC-milled titanium implant frameworks for the edentulous mandible. Int J Prosthodont 2003;16:194–200.

Kunavisarut C, Lang L, Stoner B, Felton D.finite element analysis on dental implant supported prostheses without passive fit.J Prosthodont.2002;11:30-34.